Line for growing gutter production

TL series roll forming machines for producing growing gutter shapes from galvanized steel with polymer coating, 0.5 to 0.7 mm thickness, applied in a greenhouse facility for growing crops using hydroponics technology.

The roll-forming machine equipped with calibration mill stands, allowing performing a quick fine-adjustment for necessary thickness and metal type. Availability of additional gear wheels and side idle rollers provides rolling of shape of ideal configuration. Application of specialized independent rotating shaping rollers allows significant reduction of power consumption.

Strip of required width and length used as workpiece. The incoming strip width can be changed within narrow range (up to 10 mm) for some shape types using movable entry guides at the machine.

Optionally installed wheels with a braking mechanism, manual transversal cutter and metal decoiler make the machine operation process into a convenient mobile production of trays for the whole bay of greenhouse facility.

To get a quotation of the equipment you should write us by e-mail: info@mobiprof.ru or call us.

A custom build roll forming machine based on the customer’s drawings can be manufactured.
* On the photo, the machine shown with optional equipment.

• calibration mill stand for setting up the straightness of the shapes at the outlet;
• gear wheels for transmission of the torque to the upper shaft for netter drawing of metal in the rollers;
• possibility of installing a manual transversal cutter for cutting of the strip before shaping and metal uncoiling;
• mobility due to application of heavy-duty wheels with a braking mechanism allows using the machine on site;
• the shaft support bearings are maintenance-free;
• magnetic starter with overheat relay for the electric motor overload protection;
• the machine is factory-preset and does not require any additional adjustment.