Ridge cap roll former

The machines are designed for producing “ridge cap” or “neck cap” profiles of 0.4 to 0.6 mm galvanized steel with different types of polymer coating.

The machines operate both with specific cut lengths, and with metal coiled into a roll (strip) and is an efficient solution for manufacturing a large number of shapes of different standard sizes, significantly improving production activity of the enterprise producing roofing products. The optimized configuration of shaping rollers ensures smooth bending of the profile and consistent dimensions over the whole length of the product.

The equipment is mobile, reliable and simple in operation and maintenance. Due to its small overall dimensions and weight, it can be used not only in a shop, but also on a construction site.

Application fields:

• ridge cap;
• rake trim;
• neck cap.

To get a quotation of the equipment you should write us by e-mail: info@mobiprof.ru or call us.

A custom build roll forming machine based on the customer’s drawings can be manufactured.

• possibility of manufacturing the shapes of different width and length;
• the optimized configuration of forming rollers for high-quality rolling of all metal types with any polymer coating;
• calibration mill stand allow performing fine tuning of the machine for the required metal type.;
• additionally equipped gear wheels for improved metal drawing;
• the design simplicity and reliability combined with light weight and small dimensions of the machine;
• movable entry guides.